Real boards. Specific evidence.
The following specifications come from delivered orders. They show particular combinations we have built, rather than implying that all published process limits can be combined.
Shipped in production / HSX
01 / Case studies
34-layer, 7-step HDI
Seven sequential laminations on IT-180, with buried vias L12–L17 and resin-plugged through-holes at 25:1.
Delivered build specifications
- Material
- IT-180
- Layers
- 34
- Thickness
- 6.35 mm
- Aspect ratio
- 25:1
- Finish
- ENIG + selective hard gold
Engineering considerations
High layer count, sequential lamination and deep plated holes in one build. For a similar project, send the complete stack-up, drill spans, fabrication notes and quantities. Our CAM engineers will confirm the achievable specification, test requirements and delivery schedule for your design.
Shipped in production / HSX
02 / Case studies
P1.25 LED display board
A 4-layer HDI board for a fine-pitch LED wall, drilled and tested at scale on our flying-probe line.
Delivered build specifications
- Material
- FR-4, Tg 170
- Layers
- 4, HDI
- Thickness
- 0.6 mm
- Holes
- 159,300
- Test points
- 177,300
Engineering considerations
Dense drilling and electrical testing for a fine-pitch display module. For a similar project, send the complete stack-up, drill spans, fabrication notes and quantities. Our CAM engineers will confirm the achievable specification, test requirements and delivery schedule for your design.
Shipped in production / HSX
03 / Case studies
12-layer graphics card board
A high-speed TU872 build with bevelled gold fingers and 2.6/2.6 mil routing.
Delivered build specifications
- Material
- TU872 (high speed)
- Layers
- 12
- Size
- 107 × 217 mm
- Trace / space
- 0.065 / 0.065 mm
- Finish
- ENIG + gold fingers + OSP
Engineering considerations
High-speed laminate, fine routing and multiple surface finishes. For a similar project, send the complete stack-up, drill spans, fabrication notes and quantities. Our CAM engineers will confirm the achievable specification, test requirements and delivery schedule for your design.
Send your design. Let’s build it properly.
Upload Gerber or ODB++, stack-up and quantities. Standard PCB quotes usually take 30 minutes in working hours; HDI, rigid-flex and special materials usually take up to 24 hours.